- Mac Os High Sierra
- Command For Macos Symlink Path Xcode Version
- Command For Macos Symlink Path Xcode Download
- Command For Mac Os Symlink Path Xcode 10
- Mac Os Versions
- Mac Os Mojave
File manipulation command.
Leave all values as shown, except you must replace the path /Users/myusername in line 9 with the path to the folder you want the AWS CLI version 2 installed to. The folder must already exist, or the command. Xcode run flutter app is faild, error: The sandbox is not in sync with the Podfile.lock. Run 'pod install' or update your CocoaPods installation. And run pod install Prompt the following error, I tried to re-install CocoaPods, ruby, Bu.
Reading¶
Read content from a file called
<filename>
and store it in a<variable>
. Optionally start from the given <offset>
andread at most <max-in>
bytes. The HEX
option causes data tobe converted to a hexadecimal representation (useful for binary data). If theHEX
option is specified, letters in the output (a
through f
) are inlowercase.Parse a list of ASCII strings from
<filename>
and store it in<variable>
. Binary data in the file are ignored. Carriage return(r
, CR) characters are ignored. The options are:LENGTH_MAXIMUM<max-len>
Consider only strings of at most a given length.
LENGTH_MINIMUM<min-len>
Consider only strings of at least a given length.
LIMIT_COUNT<max-num>
Limit the number of distinct strings to be extracted.
LIMIT_INPUT<max-in>
Limit the number of input bytes to read from the file.
LIMIT_OUTPUT<max-out>
Limit the number of total bytes to store in the
<variable>
.NEWLINE_CONSUME
Treat newline characters (
n
, LF) as part of string contentinstead of terminating at them.NO_HEX_CONVERSION
Intel Hex and Motorola S-record files are automatically converted tobinary while reading unless this option is given.
REGEX<regex>
Consider only strings that match the given regular expression.
ENCODING<encoding-type>
Consider strings of a given encoding. Currently supported encodings are:UTF-8, UTF-16LE, UTF-16BE, UTF-32LE, UTF-32BE. If the ENCODING optionis not provided and the file has a Byte Order Mark, the ENCODING optionwill be defaulted to respect the Byte Order Mark.
For example, the code
stores a list in the variable
myfile
in which each item is a linefrom the input file.Compute a cryptographic hash of the content of
<filename>
andstore it in a <variable>
. The supported <HASH>
algorithm namesare those listed by the string(<HASH>)command.Compute a string representation of the modification time of
<filename>
and store it in <variable>
. Should the command be unable to obtain atimestamp variable will be set to the empty string (“”).See the
string(TIMESTAMP)
command for documentation ofthe <format>
and UTC
options.Recursively get the list of libraries depended on by the given files.
Please note that this sub-command is not intended to be used in project mode.Instead, use it in an
install(CODE)
or install(SCRIPT)
block. For example:The arguments are as follows:
RESOLVED_DEPENDENCIES_VAR<deps_var>
Name of the variable in which to store the list of resolved dependencies.
UNRESOLVED_DEPENDENCIES_VAR<unresolved_deps_var>
Name of the variable in which to store the list of unresolved dependencies.If this variable is not specified, and there are any unresolved dependencies,an error is issued.
CONFLICTING_DEPENDENCIES_PREFIX<conflicting_deps_prefix>
Variable prefix in which to store conflicting dependency information.Dependencies are conflicting if two files with the same name are found intwo different directories. The list of filenames that conflict are stored in
<conflicting_deps_prefix>_FILENAMES
. For each filename, the list of pathsthat were found for that filename are stored in<conflicting_deps_prefix>_<filename>
.EXECUTABLES<executable_files>
List of executable files to read for dependencies. These are executables thatare typically created with
add_executable()
, but they do not have tobe created by CMake. On Apple platforms, the paths to these files determinethe value of @executable_path
when recursively resolving the libraries.Specifying any kind of library (STATIC
, MODULE
, or SHARED
) herewill result in undefined behavior.LIBRARIES<library_files>
List of library files to read for dependencies. These are libraries that aretypically created with
add_library(SHARED)
, but they do not haveto be created by CMake. Specifying STATIC
libraries, MODULE
libraries, or executables here will result in undefined behavior.MODULES<module_files>
List of loadable module files to read for dependencies. These are modulesthat are typically created with
add_library(MODULE)
, but they donot have to be created by CMake. They are typically used by callingdlopen()
at runtime rather than linked at link time with ld-l
.Specifying STATIC
libraries, SHARED
libraries, or executables herewill result in undefined behavior.DIRECTORIES<directories>
List of additional directories to search for dependencies. On Linuxplatforms, these directories are searched if the dependency is not found inany of the other usual paths. If it is found in such a directory, a warningis issued, because it means that the file is incomplete (it does not list allof the directories that contain its dependencies). On Windows platforms,these directories are searched if the dependency is not found in any of theother search paths, but no warning is issued, because searching other pathsis a normal part of Windows dependency resolution. On Apple platforms, thisargument has no effect.
BUNDLE_EXECUTABLE<bundle_executable_file>
Executable to treat as the “bundle executable” when resolving libraries. OnApple platforms, this argument determines the value of
@executable_path
when recursively resolving libraries for LIBRARIES
and MODULES
files.It has no effect on EXECUTABLES
files. On other platforms, it has noeffect. This is typically (but not always) one of the executables in theEXECUTABLES
argument which designates the “main” executable of thepackage.The following arguments specify filters for including or excluding libraries tobe resolved. See below for a full description of how they work.
PRE_INCLUDE_REGEXES<regexes>
List of pre-include regexes through which to filter the names ofnot-yet-resolved dependencies.
PRE_EXCLUDE_REGEXES<regexes>
List of pre-exclude regexes through which to filter the names ofnot-yet-resolved dependencies.
POST_INCLUDE_REGEXES<regexes>
Metal slug 7 rom mame recalbox bios. List of post-include regexes through which to filter the names of resolveddependencies.
POST_EXCLUDE_REGEXES<regexes>
List of post-exclude regexes through which to filter the names of resolveddependencies.
These arguments can be used to blacklist unwanted system libraries whenresolving the dependencies, or to whitelist libraries from a specificdirectory. The filtering works as follows:
- If the not-yet-resolved dependency matches any of the
PRE_INCLUDE_REGEXES
, steps 2 and 3 are skipped, and the dependencyresolution proceeds to step 4. - If the not-yet-resolved dependency matches any of the
PRE_EXCLUDE_REGEXES
, dependency resolution stops for that dependency. - Otherwise, dependency resolution proceeds.
file(GET_RUNTIME_DEPENDENCIES)
searches for the dependency according tothe linking rules of the platform (see below).- If the dependency is found, and its full path matches one of the
POST_INCLUDE_REGEXES
, the full path is added to the resolveddependencies, andfile(GET_RUNTIME_DEPENDENCIES)
recursively resolvesthat library’s own dependencies. Otherwise, resolution proceeds to step 6. - If the dependency is found, but its full path matches one of the
POST_EXCLUDE_REGEXES
, it is not added to the resolved dependencies, anddependency resolution stops for that dependency. - If the dependency is found, and its full path does not match either
POST_INCLUDE_REGEXES
orPOST_EXCLUDE_REGEXES
, the full path is addedto the resolved dependencies, andfile(GET_RUNTIME_DEPENDENCIES)
recursively resolves that library’s own dependencies.
Different platforms have different rules for how dependencies are resolved.These specifics are described here.
On Linux platforms, library resolution works as follows:
- If the depending file does not have any
RUNPATH
entries, and the libraryexists in one of the depending file’sRPATH
entries, or its parents’, inthat order, the dependency is resolved to that file. - Otherwise, if the depending file has any
RUNPATH
entries, and thelibrary exists in one of those entries, the dependency is resolved to thatfile. - Otherwise, if the library exists in one of the directories listed by
ldconfig
, the dependency is resolved to that file. - Otherwise, if the library exists in one of the
DIRECTORIES
entries, thedependency is resolved to that file. In this case, a warning is issued,because finding a file in one of theDIRECTORIES
means that thedepending file is not complete (it does not list all the directories fromwhich it pulls dependencies). - Otherwise, the dependency is unresolved.
On Windows platforms, library resolution works as follows:
- The dependent DLL name is converted to lowercase. Windows DLL names arecase-insensitive, and some linkers mangle the case of the DLL dependencynames. However, this makes it more difficult for
PRE_INCLUDE_REGEXES
,PRE_EXCLUDE_REGEXES
,POST_INCLUDE_REGEXES
, andPOST_EXCLUDE_REGEXES
to properly filter DLL names - every regex wouldhave to check for both uppercase and lowercase letters. For example:Converting the DLL name to lowercase allows the regexes to only matchlowercase names, thus simplifying the regex. For example:This regex will matchmylibrary.dll
regardless of how it is cased,either on disk or in the depending file. (For example, it will matchmylibrary.dll
,MyLibrary.dll
, andMYLIBRARY.DLL
.)Please note that the directory portion of any resolved DLLs retains itscasing and is not converted to lowercase. Only the filename portion isconverted. - (Not yet implemented) If the depending file is a Windows Store app, andthe dependency is listed as a dependency in the application’s packagemanifest, the dependency is resolved to that file.
- Otherwise, if the library exists in the same directory as the dependingfile, the dependency is resolved to that file.
- Otherwise, if the library exists in either the operating system’s
system32
directory or theWindows
directory, in that order, thedependency is resolved to that file. - Otherwise, if the library exists in one of the directories specified by
DIRECTORIES
, in the order they are listed, the dependency is resolved tothat file. In this case, a warning is not issued, because searching otherdirectories is a normal part of Windows library resolution. - Otherwise, the dependency is unresolved.
On Apple platforms, library resolution works as follows:
- If the dependency starts with
@executable_path/
, and anEXECUTABLES
argument is in the process of being resolved, and replacing@executable_path/
with the directory of the executable yields anexisting file, the dependency is resolved to that file. - Otherwise, if the dependency starts with
@executable_path/
, and there isaBUNDLE_EXECUTABLE
argument, and replacing@executable_path/
withthe directory of the bundle executable yields an existing file, thedependency is resolved to that file. - Otherwise, if the dependency starts with
@loader_path/
, and replacing@loader_path/
with the directory of the depending file yields anexisting file, the dependency is resolved to that file. - Otherwise, if the dependency starts with
@rpath/
, and replacing@rpath/
with one of theRPATH
entries of the depending file yieldsan existing file, the dependency is resolved to that file. Note thatRPATH
entries that start with@executable_path/
or@loader_path/
also have these items replaced with the appropriate path. - Otherwise, if the dependency is an absolute file that exists, the dependencyis resolved to that file.
- Otherwise, the dependency is unresolved.
This function accepts several variables that determine which tool is used fordependency resolution:
CMAKE_GET_RUNTIME_DEPENDENCIES_PLATFORM
¶Determines which operating system and executable format the files are builtfor. This could be one of several values:
linux+elf
windows+pe
macos+macho
If this variable is not specified, it is determined automatically by systemintrospection.
CMAKE_GET_RUNTIME_DEPENDENCIES_TOOL
¶Determines the tool to use for dependency resolution. It could be one ofseveral values, depending on the value of
CMAKE_GET_RUNTIME_DEPENDENCIES_PLATFORM
:CMAKE_GET_RUNTIME_DEPENDENCIES_PLATFORM | CMAKE_GET_RUNTIME_DEPENDENCIES_TOOL |
---|---|
linux+elf | objdump |
windows+pe | dumpbin |
windows+pe | objdump |
macos+macho | otool |
If this variable is not specified, it is determined automatically by systemintrospection.
CMAKE_GET_RUNTIME_DEPENDENCIES_COMMAND
¶Determines the path to the tool to use for dependency resolution. This is theactual path to
objdump
, dumpbin
, or otool
.Download icloud pictures bulk mac. If this variable is not specified, it is determined by the value of
CMAKE_OBJDUMP
if set, else by system introspection.Writing¶
Write
<content>
into a file called <filename>
. If the file doesnot exist, it will be created. If the file already exists, WRITE
mode will overwrite it and APPEND
mode will append to the end.Any directories in the path specified by <filename>
that do notexist will be created.If the file is a build input, use the
configure_file()
commandto update the file only when its content changes.Create a file with no content if it does not yet exist. If the file alreadyexists, its access and/or modification will be updated to the time when thefunction call is executed.
Use TOUCH_NOCREATE to touch a file if it exists but not create it. If a filedoes not exist it will be silently ignored.
With TOUCH and TOUCH_NOCREATE the contents of an existing file will not bemodified.
Generate an output file for each build configuration supported by the current
CMakeGenerator
. Evaluategeneratorexpressions
from the input content to produce the output content. The options are:![Command For Macos Symlink Path Xcode Command For Macos Symlink Path Xcode](/uploads/1/2/6/0/126030637/806091543.png)
CONDITION<condition>
Generate the output file for a particular configuration only ifthe condition is true. The condition must be either
0
or 1
after evaluating generator expressions.CONTENT<content>
Use the content given explicitly as input.
INPUT<input-file>
Use the content from a given file as input.A relative path is treated with respect to the value of
CMAKE_CURRENT_SOURCE_DIR
. See policy CMP0070
.OUTPUT<output-file>
Specify the output file name to generate. Use generator expressionssuch as
$<CONFIG>
to specify a configuration-specific output filename. Multiple configurations may generate the same output file onlyif the generated content is identical. Otherwise, the <output-file>
must evaluate to an unique name for each configuration.A relative path (after evaluating generator expressions) is treatedwith respect to the value of CMAKE_CURRENT_BINARY_DIR
.See policy CMP0070
.Exactly one
CONTENT
or INPUT
option must be given. A specificOUTPUT
file may be named by at most one invocation of file(GENERATE)
.Generated files are modified and their timestamp updated on subsequent cmakeruns only if their content is changed.Note also that
file(GENERATE)
does not create the output file until thegeneration phase. The output file will not yet have been written when thefile(GENERATE)
command returns, it is written only after processing allof a project’s CMakeLists.txt
files.Generate an output file using the input given by
CONTENT
and substitutevariable values referenced as @VAR@
or ${VAR}
contained therein. Thesubstitution rules behave the same as the configure_file()
command.In order to match configure_file()
’s behavior, generator expressionsare not supported for both OUTPUT
and CONTENT
.The arguments are:
OUTPUT<output-file>
Specify the output file name to generate. A relative path is treated withrespect to the value of
CMAKE_CURRENT_BINARY_DIR
.<output-file>
does not support generator expressions.CONTENT<content>
Use the content given explicitly as input.
<content>
does not support generator expressions.ESCAPE_QUOTES
Escape any substituted quotes with backslashes (C-style).
@ONLY
Restrict variable replacement to references of the form
@VAR@
.This is useful for configuring scripts that use ${VAR}
syntax.NEWLINE_STYLE<style>
Specify the newline style for the output file. Specify
UNIX
or LF
for n
newlines, or specifyDOS
, WIN32
, or CRLF
for rn
newlines.Filesystem¶
Generate a list of files that match the
<globbing-expressions>
andstore it into the <variable>
. Globbing expressions are similar toregular expressions, but much simpler. If RELATIVE
flag isspecified, the results will be returned as relative paths to the givenpath. The results will be ordered lexicographically.On Windows and macOS, globbing is case-insensitive even if the underlyingfilesystem is case-sensitive (both filenames and globbing expressions areconverted to lowercase before matching). On other platforms, globbing iscase-sensitive.
If the
CONFIGURE_DEPENDS
flag is specified, CMake will add logicto the main build system check target to rerun the flagged GLOB
commandsat build time. If any of the outputs change, CMake will regenerate the buildsystem.By default
GLOB
lists directories - directories are omitted in result ifLIST_DIRECTORIES
is set to false.Note
We do not recommend using GLOB to collect a list of source files fromyour source tree. If no CMakeLists.txt file changes when a source isadded or removed then the generated build system cannot know when toask CMake to regenerate.The
CONFIGURE_DEPENDS
flag may not work reliably on all generators, or ifa new generator is added in the future that cannot support it, projects usingit will be stuck. Even if CONFIGURE_DEPENDS
works reliably, there isstill a cost to perform the check on every rebuild.Examples of globbing expressions include:
The
GLOB_RECURSE
mode will traverse all the subdirectories of thematched directory and match the files. Subdirectories that are symlinksare only traversed if FOLLOW_SYMLINKS
is given or policyCMP0009
is not set to NEW
.By default
GLOB_RECURSE
omits directories from result list - settingLIST_DIRECTORIES
to true adds directories to result list.If FOLLOW_SYMLINKS
is given or policy CMP0009
is not set toNEW
then LIST_DIRECTORIES
treats symlinks as directories.Examples of recursive globbing include:
Move a file or directory within a filesystem from
<oldname>
to<newname>
https://Logmein-For-Mac-316.peatix.com/. , replacing the destination atomically.Remove the given files. The
REMOVE_RECURSE
mode will remove the givenfiles and directories, also non-empty directories. No error is emitted if agiven file does not exist. Relative input paths are evaluated with respectto the current source directory. Empty input paths are ignored with a warning.Create the given directories and their parents as needed.
The
COPY
signature copies files, directories, and symlinks to adestination folder. Relative input paths are evaluated with respectto the current source directory, and a relative destination isevaluated with respect to the current build directory. Copyingpreserves input file timestamps, and optimizes out a file if it existsat the destination with the same timestamp. Copying preserves inputpermissions unless explicit permissions or NO_SOURCE_PERMISSIONS
are given (default is USE_SOURCE_PERMISSIONS
).If
FOLLOW_SYMLINK_CHAIN
is specified, COPY
will recursively resolvethe symlinks at the paths given until a real file is found, and installa corresponding symlink in the destination for each symlink encountered. Foreach symlink that is installed, the resolution is stripped of the directory,leaving only the filename, meaning that the new symlink points to a file inthe same directory as the symlink. This feature is useful on some Unix systems,where libraries are installed as a chain of symlinks with version numbers, withless specific versions pointing to more specific versions.FOLLOW_SYMLINK_CHAIN
will install all of these symlinks and the libraryitself into the destination directory. For example, if you have the followingdirectory structure:/opt/foo/lib/libfoo.so.1.2.3
/opt/foo/lib/libfoo.so.1.2->libfoo.so.1.2.3
/opt/foo/lib/libfoo.so.1->libfoo.so.1.2
/opt/foo/lib/libfoo.so->libfoo.so.1
and you do:
This will install all of the symlinks and
libfoo.so.1.2.3
itself intolib
.See the
install(DIRECTORY)
command for documentation ofpermissions, FILES_MATCHING
, PATTERN
, REGEX
, andEXCLUDE
options. Copying directories preserves the structureof their content even if options are used to select a subset offiles.The
INSTALL
signature differs slightly from COPY
: it printsstatus messages (subject to the CMAKE_INSTALL_MESSAGE
variable),and NO_SOURCE_PERMISSIONS
is default.Installation scripts generated by the install()
commanduse this signature (with some undocumented options for internal use).Determine the file size of the
<filename>
and put the result in<variable>
variable. Requires that <filename>
is a valid pathpointing to a file and is readable.This subcommand queries the symlink
<linkname>
and stores the path itpoints to in the result <variable>
. If <linkname>
does not exist oris not a symlink, CMake issues a fatal error.Note that this command returns the raw symlink path and does not resolvea relative path. The following is an example of how to ensure that anabsolute path is obtained:
Create a link
<linkname>
that points to <original>
.It will be a hard link by default, but providing the SYMBOLIC
optionresults in a symbolic link instead. Hard links require that original
exists and is a file, not a directory. If <linkname>
already exists,it will be overwritten.The
<result>
variable, if specified, receives the status of the operation.It is set to 0
upon success or an error message otherwise. If RESULT
is not specified and the operation fails, a fatal error is emitted.Specifying
COPY_ON_ERROR
enables copying the file as a fallback ifcreating the link fails. It can be useful for handling situations such as<original>
and <linkname>
being on different drives or mount points,which would make them unable to support a hard link.Path Conversion¶
Compute the relative path from a
<directory>
to a <file>
andstore it in the <variable>
.The
TO_CMAKE_PATH
mode converts a native <path>
into a cmake-stylepath with forward-slashes (/
). The input can be a single path or asystem search path like $ENV{PATH}
. A search path will be convertedto a cmake-style list separated by ;
characters.The
TO_NATIVE_PATH
mode converts a cmake-style <path>
into a nativepath with platform-specific slashes (
on Windows and /
elsewhere).Always use double quotes around the
<path>
to be sure it is treatedas a single argument to this command.Transfer¶
Netbeans mac download. The
DOWNLOAD
mode downloads the given <url>
to a local <file>
.The UPLOAD
mode uploads a local <file>
to a given <url>
.Options to both
DOWNLOAD
and UPLOAD
are:INACTIVITY_TIMEOUT<seconds>
Terminate the operation after a period of inactivity.
LOG<variable>
Store a human-readable log of the operation in a variable.
SHOW_PROGRESS
Print progress information as status messages until the operation iscomplete.
STATUS<variable>
Store the resulting status of the operation in a variable.The status is a
;
separated list of length 2.The first element is the numeric return value for the operation,and the second element is a string value for the error.A 0
numeric error means no error in the operation.TIMEOUT<seconds>
Terminate the operation after a given total time has elapsed.
USERPWD<username>:<password>
Set username and password for operation.
HTTPHEADER<HTTP-header>
HTTP header for operation. Suboption can be repeated several times.
NETRC<level>
Specify whether the .netrc file is to be used for operation. If thisoption is not specified, the value of the
CMAKE_NETRC
variablewill be used instead.Valid levels are:IGNORED
The .netrc file is ignored.This is the default.
OPTIONAL
The .netrc file is optional, and information in the URL is preferred.The file will be scanned to find which ever information is not specifiedin the URL.
REQUIRED
The .netrc file is required, and information in the URL is ignored.
NETRC_FILE<file>
Specify an alternative .netrc file to the one in your home directory,if the
NETRC
level is OPTIONAL
or REQUIRED
. If this optionis not specified, the value of the CMAKE_NETRC_FILE
variable willbe used instead.If neither
NETRC
option is given CMake will check variablesCMAKE_NETRC
and CMAKE_NETRC_FILE
, respectively.TLS_VERIFY<ON|OFF>
Specify whether to verify the server certificate for
https://
URLs.The default is to not verify.TLS_CAINFO<file>
Specify a custom Certificate Authority file for
https://
URLs.For
https://
URLs CMake must be built with OpenSSL support. TLS/SSL
certificates are not checked by default. Set TLS_VERIFY
to ON
tocheck certificates. If neither TLS
option is given CMake will checkvariables CMAKE_TLS_VERIFY
and CMAKE_TLS_CAINFO
, respectively.Additional options to
DOWNLOAD
are:EXPECTED_HASHALGO=<value>
Verify that the downloaded content hash matches the expected value, where
ALGO
is one of the algorithms supported by file(<HASH>)
.If it does not match, the operation fails with an error.EXPECTED_MD5<value>
Historical short-hand for
EXPECTED_HASHMD5=<value>
.Locking¶
Lock a file specified by
<path>
if no DIRECTORY
option present and file<path>/cmake.lock
otherwise. File will be locked for scope defined byGUARD
option (default value is PROCESS
). RELEASE
option can be usedto unlock file explicitly. If option TIMEOUT
is not specified CMake willwait until lock succeed or until fatal error occurs. If TIMEOUT
is set to0
lock will be tried once and result will be reported immediately. IfTIMEOUT
is not 0
CMake will try to lock file for the period specifiedby <seconds>
value. Any errors will be interpreted as fatal if there is noRESULT_VARIABLE
option. Otherwise result will be stored in <variable>
and will be 0
on success or error message on failure.Mac Os High Sierra
Note that lock is advisory - there is no guarantee that other processes willrespect this lock, i.e. lock synchronize two or more CMake instances sharingsome modifiable resources. Similar logic applied to
DIRECTORY
option -locking parent directory doesn’t prevent other LOCK
commands to lock anychild directory or file.Trying to lock file twice is not allowed. Any intermediate directories andfile itself will be created if they not exist.
GUARD
and TIMEOUT
options ignored on RELEASE
operation.Command For Macos Symlink Path Xcode Version
Archiving¶
Creates the specified
<archive>
file with the files and directorieslisted in <paths>
. Note that <paths>
must list actual files ordirectories, wildcards are not supported.Use the
FORMAT
option to specify the archive format. Supported valuesfor <format>
are 7zip
, gnutar
, pax
, paxr
, raw
andzip
. If FORMAT
is not given, the default format is paxr
.Some archive formats allow the type of compression to be specified.The
7zip
and zip
archive formats already imply a specific type ofcompression. The other formats use no compression by default, but can bedirected to do so with the COMPRESSION
option. Valid values for<compression>
are None
, BZip2
, GZip
, XZ
, and Zstd
.Command For Macos Symlink Path Xcode Download
Note
With
FORMAT
set to raw
only one file will be compressed with thecompression type specified by COMPRESSION
.The
VERBOSE
https://ameblo.jp/leovisgako1972/entry-12639651680.html. option enables verbose output for the archive operation.To specify the modification time recorded in tarball entries, usethe
MTIME
option.Extracts or lists the content of the specified
<archive>
.The directory where the content of the archive will be extracted to canbe specified using the
DESTINATION
option. If the directory does notexist, it will be created. If DESTINATION
is not given, the currentbinary directory will be used.If required, you may select which files and directories to list or extractfrom the archive using the specified
<patterns>
. Wildcards are supported.If the PATTERNS
option is not given, the entire archive will be listed orextracted.LIST_ONLY
will list the files in the archive rather than extract them.With
VERBOSE
, the command will produce verbose output.The shell path for a user in macOS or OSX is a set of locations in the filing system whereby the user has permissions to use certain applications, commands and programs without the need to specify the full path to that command or program in the Terminal. This will work in macOS Mojave, Sierra and all older OSX operating systems; El Capitan, Yosemite, Mavericks and Lion.
So instead of running something like this, with a path to the command:
You can just type the command, regardless of where you are in the filing system:
Your shell path is a bunch of absolute paths of the filing system separated by colons :
You can find out whats in your path by launching Terminal in Applications/Utilities and entering:
And the result should be like this…
So this is stating that you can run Unix style applications or commands located in 5 default locations of a certain path in the filing system:
- /usr/bin
- /bin
- /usr/sbin
- /sbin
- /usr/local/bin
These directories are not visible by default in the filing system but you can make them visible.
Adding a Temporary Location
You can add extra locations to your path, in the mysql example above it’s location /usr/local/mysql/bin which is not in the default path, you can add it in Terminal like so:
![Command For Macos Symlink Path Xcode Command For Macos Symlink Path Xcode](/uploads/1/2/6/0/126030637/327031200.png)
So here I have copied my existing path and added the new location on the end. Test it by running echo $PATH again in the Terminal.
One of the disadvantages of this is that the new location will only be honored for that particular Terminal session, when a new Terminal window is launched it will have the original default path again.
Adding in a Permanent Location
To make the new pathstick permanently you need to create a .bash_profile file in your home directory and set the path there. This file control various Terminal environment preferences including the path.
Move into home directory
Create the .bash_profile file with a command line editor called nano
Add in the above line which declares the new location /usr/local/mysql/bin as well as the original path declared as $PATH.
Save the file in nano by clicking ‘control’ +’o’ and confirming the name of the file is .bash_profile by hitting return. And the ‘control’+’x’ to exit nano
Command For Mac Os Symlink Path Xcode 10
So now when the Terminal is relaunched or a new window made and you check the the path by
Mac Os Versions
You will get the new path at the front followed by the default path locations, all the time
Rearranging the default $PATH
Mac Os Mojave
If you needed to rearrange the paths in the default $PATH variable, you can just do that and leave off $PATH.
So lets say you want /use/local/bin at the beginning to take precedence you can add the default path like so inside .bash_profile
And then you can slot in other paths as required.